Wednesday, September 22, 2010
I sort of took a day off on Tuesday.
There's much to do to prepare for the solo show in Asheville, attend to all the business stuff that I dropped to focus on the final push, etc. There's still a mess of slip and glaze to be mopped up in the shop. But I put a few things away and made room for the pots!!
All in all, though, it was a restful day. It felt odd not to be pushing so hard every minute and felt good that the work had been done. As it always does. There's so much satisfaction and relief that comes when that last brick goes into the door of the kiln and the fire is lit. As if the hard part was done and that the firing would be the frosting on the cake. But I can only say that because I always have a great crew that helps out tending to the fire. John Simmons brought all of his wood firing experience to bear and allowed me to take a nap while he single handedly made the transition from the lower firebox to the grates. A job that usually take two!
Alan Gratz made his first appearance since his teaching trip to Japan last Spring. He was focused and steady with his stokes and claimed at one point that he was "born to burn"!! (T-shirt idea!)
Micah Cain stopped by and helped us develop the new salting technique. While John cut the 1/2 inch thick boards to length, Micah loaded the boards up with salt. We then inserted the boards between the opposing stoke doors and rested them there so that the salt vaporized almost completely before the board was consumed. All the while Alan kept the firebox full of wood. [I have pictures on my phone to put here later, sorry]
Last night I took a peek into the kiln which was still about 450°F. Without melting my lense, I got this shot of a big jug with some pinkish blushes from the back of the kiln! I will get it unloaded on Thursday. With 3 inches of fiber insulation, it takes a while to really cool down, and I'm still a little gun-shy from my dunting in the past.