September 30, 2009

Waxing Moon, Waxing Pots

My late night java connection yielded some pretty good results. A lot of what I painted was white slip-wax resist-white slip, otherwise known around here as "white on white" (as in the cylinder on the left). The cylinder on the right utilizes regular wax in addition to my special black wax.

Fired bisque number 5 with some big bowls. To save space I stacked the bowls with ceramic fiber as a cushion. Years ago, Mark Shapiro and I had heard of someone using this technique in bisque firing and stacking bowls. I tend to get weird cracks if I stack big bowls without the wool. I'm not sure of the original source of this technique, but thank you, whoever you are!

Here are some other top secret techniques used today. When I cut the rims of these small plates, it leaves a burr along the edge of the cut. Just before bisquing, I "scrub" the burr down with a green pot scrubber. The green scrubbie is just rough enough to take the burr down without changing the edge too much. It doesn't lift out sand or coarse particles like sand paper might. Well, this process leaves the pot dusty. After the bisque firing. I rinse the plates off in a bucket of clean water. Here is a solution to soaking wet pots preparing them for some slip dipping. The wood stove was warm so I set the plates on the rack to dry.

No secret associated with the two little hollow rim bowls below. Just liked them.

Wednesday will be a big painting day now that I'm warmed up. I'll do some Chin Dynasty
Tz'u Chou peonies and even some birds! I want to do a video of my brushwork technique, so maybe check back for that, too.